EcoProtec Joint Residue Remover – Non‑Caustic Softening Agent for Epoxy, Acrylic & Silicone Residues – Shelber Daily Spotlight

EcoProtec Joint Residue Remover is a high‑performance, non‑caustic softening agent designed to break down stubborn epoxy, acrylic, and silicone residues left behind by cement‑free brush‑in jointing compounds. These residues often bond strongly to natural stone and porcelain paving, making removal difficult using standard cleaners. This advanced formula softens the residues, allowing them to be lifted and removed with significantly less effort.

The product is ideal for contractors, landscapers, paving installers, and maintenance teams who need a reliable solution for post‑installation cleaning. Its low‑odour, non‑caustic composition makes it safer and more pleasant to use compared to harsh chemical strippers. EcoProtec Joint Residue Remover is suitable for natural stone, porcelain paving, and other mineral surfaces commonly used in patios, walkways, terraces, and landscaping projects.

This remover is particularly effective when epoxy or acrylic jointing compounds have been over‑applied, smeared, or left to cure on the surface. By softening the hardened residues, it allows mechanical agitation to remove them without damaging the underlying stone or tile. When used correctly, the product restores the surface to its original clean condition.

Key Features

• Softens epoxy, acrylic, and silicone residues
• Non‑caustic, low‑odour formulation
• Ideal for natural stone and porcelain paving
• Makes removal of jointing compound residues significantly easier
• Suitable for professional and residential use
• High‑performance stripping action
• Compatible with ECOPROTEC Intensive Cleaner for final finishing

Coverage

Coverage varies depending on residue thickness and surface porosity:

• Light stripping: 8–10 m² per litre
• Deep stripping: 5 m² per litre

Applications

Ideal for:

• Removing epoxy jointing compound residues
• Softening acrylic and silicone smears
• Cleaning porcelain and natural stone paving
• Post‑installation restoration
• Landscaping and paving maintenance
• Patio, terrace, and walkway cleaning

How It Works

EcoProtec Joint Residue Remover penetrates hardened epoxy, acrylic, and silicone residues and softens them over a 30‑minute dwell time. Once softened, the residues can be agitated using a stiff brush or nylon pad. The product’s non‑caustic formula ensures safe use on natural stone and porcelain without etching or damaging the surface.

Instructions for Use

Always test on an inconspicuous area first. Shake well before use.

Preparation

1. Ensure the surface is completely clean and dry.
2. If required, pre‑clean using EcoProtec Intensive Cleaner.
3. Rinse thoroughly and allow the surface to dry.

Removing Residues

1. Apply generously by dabbing or rolling onto the affected area.
2. Work in manageable sections.
3. Do not brush out the product; allow it to sit.
4. Leave for up to 30 minutes.
5. If drying occurs, apply more product to keep the area wet.
6. Scrub using a stiff short‑haired brush or nylon pad.
7. Add a small amount of water and scrub again.
8. Extract softened residues using a sponge or wet vacuum.
9. Rinse thoroughly with clean water.
10. Repeat if necessary.

Final Cleaning

1. Use EcoProtec Intensive Cleaner diluted 1:5 in warm water.
2. Apply with a sprayer or watering can.
3. Agitate using a deck brush or nylon pad.
4. Rinse thoroughly with clean water.

Important Notes

• Do not use when surface temperature is below 5°C or above 25°C.
• Avoid use during rain or frost.
• Clean tools with water after use.
• Once cleaned, protect porous stone and porcelain with EcoProtec Ultimate Sealer, Patio Sealer, or Colour Enhancing Sealer.

Storage

Store in a cool, dry, frost‑free environment. Shelf life: up to 2 years unopened. Once opened: use within 6 months for best results.

Safety Information

Contains benzyl alcohol. Harmful if swallowed or inhaled. Causes serious eye irritation. Use only outdoors or in well‑ventilated areas. Wear protective gloves and eye protection. If inhaled: move to fresh air. If in eyes: rinse thoroughly and remove contact lenses if present. If swallowed: seek medical attention immediately. Dispose of contents and container at a hazardous waste collection point.