EcoProtec Cement, Grout & Salt Residue Remover – Rapid‑Action Cleaner for Paving & Stone Surfaces – Shelber Daily Spotlight

EcoProtec Cement, Grout & Salt Residue Remover is a high‑performance rapid‑action cleaner designed to eliminate cement residues, grout stains, efflorescence, and salt deposits from a wide range of paving and stone surfaces. Using advanced acid‑replacement technology, it provides powerful cleaning action while being safer to handle than traditional acidic cleaners. This product is ideal for porcelain, sandstone, limestone, slate, granite, brick, terracotta, and concrete paving, restoring clarity and cleanliness to surfaces affected by installation residues or environmental salt build‑up.

Suitable for both dilute and concentrated use, the formula allows flexibility depending on the severity of contamination. It is particularly effective after grouting, construction work, or outdoor exposure where salt deposits accumulate. EcoProtec Cement, Grout & Salt Residue Remover penetrates deep into the surface to break down stubborn residues, making it an essential product for contractors, tilers, maintenance teams, and homeowners seeking reliable restoration results.

This cleaner is not suitable for highly polished natural stones such as polished marble, polished limestone, or polished travertine. Always test on an inconspicuous area before full application. When used correctly, the product delivers fast, visible results and restores the natural appearance of paving and stone surfaces.

Key Features

• Rapid‑action cleaner for cement, grout, and salt residues
• Acid‑replacement technology for safer handling
• Suitable for porcelain, sandstone, limestone, slate, granite, brick, terracotta, and concrete
• Helps reduce spot‑fixing residues
• Effective in dilute or concentrated form
• Restores clarity and cleanliness to paving and stone
• Professional‑grade performance for contractors and maintenance teams

Coverage

Coverage per application:

• Mild cases: 1L covers up to 25 m², 5L covers up to 125 m²
• Severe cases: 1L covers up to 15 m², 5L covers up to 75 m²
• Extremely severe cases: 1L covers up to 5 m², 5L covers up to 25 m²

Coverage varies depending on porosity, contamination level, and application method.

Applications

Ideal for:

• Removing cement residues after installation
• Eliminating grout haze from porcelain and stone
• Treating efflorescence and salt deposits
• Cleaning brick, terracotta, and concrete paving
• Outdoor restoration and maintenance
• Pre‑sealing surface preparation
• Construction and tiling cleanup
• Professional stone‑care and paving contractors

How It Works

EcoProtec Cement, Grout & Salt Residue Remover uses acid‑replacement chemistry to break down cementitious residues and salt deposits. When applied to the surface, it reacts with contaminants, dissolving and loosening them for easy removal through scrubbing and rinsing. The product remains effective even on stubborn residues, making it suitable for post‑installation cleaning and outdoor restoration.

Instructions for Use

Always test on an inconspicuous area first. Shake well before use.

Mild cases / non‑absorbent surfaces

• Dilute 1 part product to 4 parts cool water
• Apply evenly using a sprayer or watering can
• Leave up to 30 minutes, keeping the surface wet
• Scrub with a deck brush or nylon pad
• Rinse thoroughly with clean water

Severe cases

• Dilute 1 part product to 1 part cool water
• Apply liberally and agitate immediately
• Leave 5–10 minutes, keeping the surface wet
• Scrub again and rinse thoroughly

Extremely severe cases

• Lightly dampen the surface
• Apply undiluted
• Agitate with nylon pad or mechanical scrubber
• Extract immediately using sponge or wet vac
• Rinse thoroughly with clean water

Important notes

• Not suitable for highly polished natural stone
• Avoid use on very hot or very cold surfaces
• Rinse contaminated surfaces immediately
• Ideal working temperature: 5–25°C

Storage

Store in a cool, dry, frost‑free environment. Shelf life up to 2 years unopened.

Safety Information

Contains hydrogen chloride. Causes skin irritation and serious eye damage. Wear protective gloves, clothing, eye and face protection. Keep out of reach of children. If in eyes: rinse for several minutes, remove lenses if present, continue rinsing, seek medical attention. Dispose of contents/container according to local regulations.