EcoProtec Patio Sealer – Water‑Based Impregnating Sealer for Stone & Concrete Paving – Shelber Daily Spotlight

EcoProtec Patio Sealer is a high‑performance, water‑based impregnating sealer formulated to protect all types of natural stone, artificial stone, and concrete paving. Designed for honed, rough‑cut, flamed, brushed, and textured surfaces, this sealer provides a delicately enhanced natural finish while maintaining the authentic appearance of the material. It delivers strong resistance against water, oil, grease, and staining, making it ideal for patios, terraces, walkways, garden paving, and outdoor stone installations.

The breathable formulation allows moisture vapor to escape, helping reduce efflorescence and preventing trapped moisture beneath the surface. EcoProtec Patio Sealer penetrates deeply into the substrate without forming a surface film, ensuring long‑lasting protection while preserving the natural texture of the stone.

Suitable for both residential and commercial applications, this sealer is easy to apply using a roller, brush, or sprayer. On more absorbent surfaces, additional coats can be applied until full saturation is achieved. Once cured, the active ingredients become inert and water‑soluble, making the product environmentally responsible and safe for long‑term use.

Key Features

• Water‑based impregnating sealer
• Provides a delicately enhanced natural finish
• Strongly repels water, oil, and grease
• Allows the surface to breathe
• Helps reduce efflorescence
• Suitable for natural and artificial stone, concrete, brick, and quarry tile
• Ideal for honed, rough‑cut, flamed, brushed, and polished surfaces
• Minimal change to appearance

Coverage (per coat)

Approximate coverage for 5L:

• Honed surfaces: 150 m²
• Medium‑porosity surfaces: 75 m²
• Higher‑porosity surfaces: 37.5 m²

Coverage varies depending on porosity and surface texture.

Applications

Ideal for:

• Natural stone patios
• Artificial stone and concrete paving
• Brick and quarry tile
• Honed, flamed, brushed, and rough‑cut stone
• Outdoor terraces, walkways, and garden paving
• Residential and commercial stone installations

How It Works

EcoProtec Patio Sealer penetrates the surface to create a breathable, protective barrier that repels water, oil, and grease. By reducing moisture absorption and efflorescence, the sealer helps maintain the appearance and durability of stone and paving surfaces. The delicately enhanced finish highlights natural tones without creating a glossy film.

Instructions for Use

Preparation

1. Ensure the surface is completely clean, dry, and free from dirt, grime, cement, and grout.
2. Pre‑clean using EcoProtec Intensive Cleaner diluted 1:5.
3. Scrub with a nylon pad or deck brush.
4. Rinse thoroughly and allow to dry for 24 hours.

Application

1. Shake the bottle before use.
2. Apply evenly using a foam roller, brush, or light pressure sprayer.
3. On absorbent surfaces, apply additional coats at hourly intervals until fully saturated.
4. On vertical surfaces, apply from the bottom up and wipe drips immediately.
5. Do not apply in temperatures below 5°C or above 25°C.
6. Always test on a small area to determine the optimal number of coats.

Notes

• Saturation is achieved when an even layer remains visible after 20 minutes.
• Clean tools with water after use.
• Empty containers are recyclable.

Storage & Safety

• Store in a cool, dry, frost‑free environment.
• Store locked up.
• Shelf life: up to 2 years unopened.
• Contains 2‑Methylisothiazol‑3(2H)‑one.
• May cause allergic skin reaction.
• Wear protective gloves, clothing, and eye protection.
• If on skin: wash with water and soap.
• Dispose of contents/container according to local regulations.